Dvd Test Mode - Aiwa XR-DV700 Service Manual

DVD TEST MODE-1/3

QQ
3 7 63 1515 0
The three types of the DVD test mode are prepared.
Select the desired test mode in accordance with the requirement.
1. Status/Media Display Mode
1-1. How to Start up the Status/Media Display Mode
While pressing the DVD/CD button, connect the AC plug to the power outlet.
All of the FL displays turn on and then the test mode starts.
1-2. How to Quit the Status/Media Display Mode
Disconnect the AC plug from the power outlet to exit the test mode.
Alternately, quit the test mode by the following operation.
· Press any of the FUNCTION buttons. (Buttons other than the DVD/CD button)
· Press the POWER button.
1-3. Function Descriptions
After the DVD test mode starts up, the FL display shows the message "S**M**" as described below.
"S**" indicates the status.
Status display
S41
S42
S43
S44
S45
S46
S47
TE
L 13942296513
S48
S49
"M**" indicates the types of the media.
Media display
M00
M21
M22
M23
M24
M25
If any numbers other than the above described numbers is displayed, they are all inappropriate data.
Normal display
The normal display is shown while the DVD/CD button is pressed during startup of the Status/Media display mode.
www
.
http://www.xiaoyu163.com
STOP status of the pickup at inner circumference.
STOP status of the pickup at inner circumference with the resume data.
PLAY status
PAUSE status
SKIP status
Status of reading TOC
The signal indicating completion of writing into EEPROM
State that the status is not fixed yet
The signal indicating disc end
Description
Detection of media type is in progress.
No disc is inserted.
CD-DA
VCD (Ver 1.0 or Ver 1.1)
VCD (Ver 2.0)
DVD
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Description
Q Q
3 6 7 1 3 1 5
co
.
-51-
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9