Memorex MP3122 Operating Instructions Manual page 10

MP3122 O/M.QXD 8/12/02
COMPACT DISC (CD) OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 32 TRACKS)
1
Slide the FUNCTION switch to
the CD position; the POWER ON
indicator will light. Insert a CD as
described in the TO INSERT A
CD section on page 6.
4
Press the PROGRAM button
again; the selected track has now
been programmed and counted as
program 1.
NOTES
• Programming is the ability to preselect the order in which a series of tracks will be played.
• Each track may be stored in the program memory as many times as desired (up to 32 tracks).
• As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the SKIP/Search
• The CD player will stop after all programmed tracks have been played or the STOP ( ) button is
pressed. If the STOP ( ) button was pressed, the programmed tracks will remain in memory. Simply
press the PLAY/PAUSE (❿/ ) button to continue Program playback.
• To cancel Program playback, press the PROGRAM button to enter the Program mode and then press
the STOP ( ) button, or open the CD door.
• When 32 tracks have been programmed, the CD memory is full ("Fu" will appear in the display).
11:24 AM Page 9
2
Press the PROGRAM button, the
Program indicator will blink.
5
Repeat steps 3 and 4 to program
the other desired tracks in
sequence (up to 32 tracks).
3
Use the SKIP/Search
track to be programmed.
6
Press the PLAY/ PAUSE (❿/ )
button to begin playback; the
Program indicator will light and
the tracks will play in the order
programmed.
or button.
9
2
1
or
button to select the first