Setting The Temperature Control; Optional Features - Frigidaire FFRU17B2QW Use & Care Manual

FIRST STEPS
3. Once the inside surface snaps in place,
continue the process by rolling the handle
clip slightly outward and pressing down
firmly to snap onto the outside surface. If
installed incorrectly, the handle clip will not
lay flat.
Door Removal
If door must be removed, unplug the unit.
1. Gently lay appliance on its back, on a rug
or blanket.
2. Remove 2 base screws and base panel.
3. Remove wire from clips on bottom of
cabinet if required.
4. Unplug connector, if required, by holding
the cabinet connector in place, and pulling
door connector out.
5. Remove bottom hinge screws.
6. Remove plastic top hinge cover.
7. Remove screws from top hinge.
8. Remove top hinge from cabinet.
9. Remove door and bottom hinge
from cabinet.
10. To replace door, reverse the above order
and securely tighten all screws to prevent
hinge slippage.
6
SETTING THE
TEMPERATURE CONTROL
Cool Down Period
For safe food storage, allow 4 hours for the unit
to cool down completely. The appliance will run
continuously for the first several hours.
Temperature Control
The temperature
control is located
inside the unit. The
temperature is factory
preset to provide
satisfactory food
storage temperatures.
However, the
temperature control
is adjustable to
provide a range of temperatures for your
personal satisfaction. If a colder temperature
is desired, turn the temperature control knob
toward COLDEST, and allow several hours for
temperatures to stabalize between adjustments.

OPTIONAL FEATURES

 NOTE
Your appliance may have some, or all of the
features listed below. Become familiar with
these features, and their use and care.
Tilt-Out Shelf
This shelf is located inside on the door and provides
additional storage space. To access an item, tilt top
of "basket" shelf down.