Shift Pedal; Brake Lever - Yamaha R1 YZF-R1 Owner's Manual

Shift pedal

2
1. Shift pedal
2. Shift switch
The shift pedal is located on the left
side of the motorcycle and is used in
combination with the clutch lever when
shifting the gears of the 6-speed con-
stant-mesh transmission.
When the quick-shift system is turned
on, the shift switch senses shift pedal
movement and allows for upshifting
without operating the clutch lever. See
QSS on page 4-17 for more informa-
tion.
INSTRUMENT AND CONTROL FUNCTIONS
EAU67010

Brake lever

1
1. " " mark
2. Brake lever position adjusting dial
3. Brake lever
4. Distance between brake lever and
handlebar grip
The brake lever is located on the right
side of the handlebar. To apply the front
brake, pull the lever toward the throttle
grip.
This model is equipped with a variable
unified brake system (UBS).
When pulling the brake lever, the front
brake and a portion of the rear brake
are applied. For full braking perfor-
mance, apply both the brake lever and
brake pedal simultaneously.
EAU67033
TIP
See Brake system for more informa-
2
tion on how the UBS and ABS systems
work.
3
The brake lever is equipped with a
brake lever position adjusting dial. To
adjust the distance between the brake
1
4
lever and the throttle grip, turn the ad-
justing dial while holding the lever
pushed away from the throttle grip.
Make sure that the appropriate setting
on the adjusting dial is aligned with the
"
4-30
" mark on the brake lever.
1
2
3
4
5
6
7
8
9
10
11
12