Table of Contents
Advertisement
Root Port ASPM
The options are Disabled, L0s, L1 and L1/L0s.
DMI Port ASPM
The options are Disabled and L1.
ACPI Function
This function should be enabled only in operating systems that support ACPI.
Currently, only Windows® XP / XP 64 / Vista 32 / Vista 64 supports this function.
If you want to use the Suspend to RAM function, make sure this field is enabled
then select "S3(STR)" in the "ACPI Suspend Type" field.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
Power Management
This field allows you to select the type (or degree) of power saving by changing
the length of idle time that elapses before the HDD Power Down field is acti-
vated.
Min Saving
Minimum power saving time for the HDD Power Down = 15 min.
Max Saving
Maximum power saving time for the HDD Power Down = 1 min.
User Define
Allows you to set the power saving time in the "HDD Power Down" field.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
This will cause the system to turn off the vertical and horizontal synchroniza-
tion ports and write blanks to the video buffer.
Blank Screen
This only writes blanks to the video buffer.
DPMS Support
Initializes display power management signaling. Select this if your video
board supports it.
3
BIOS Setup
77
Advertisement
Table of Contents
