Description - Memorex MPH7828 User Manual

DESCRIPTION

CONTROLS' LOCATION AND FUNCTION
HANDSET CONTROLS
1. LCD Display: Shows the phone status, Caller ID Call Record information and function
menus.
2. TALK Button: Press to answer an incoming call, place a call or end a call.
3. MEMO (Memory) Button: Used for storing / retrieving phone numbers to / from the
20 Memory Dialing Directory.
4. TONE ( * ) Button: Used to temporarily change the dialing mode from pulse to tone for
rotary service user. Provides tone function to access special services such as phone
banking services.
5. FLASH / DELETE Button: In talk mode, it allows you to momentarily hangs up the
phone to regain dial tone or access custom calling features such as Call Waiting or
Three- Way Calling provided by your local phone company. In standby mode, it allows
you to remove one or all records from the Call Record list or Memory Dialing Directory.
6. (+) Button: Allows you to enter to your Caller Record list. It is also used to scroll up in
Call Record list, memory and program mode.
7. (-) Button: Allows you to enter to your Call Record list. It is also used to scroll down in
Call Record list, memory and program mode.
8. RE / PA (Redial / Pause) Button: Automatically dials the last phone number dialed up
to 31 digits. Also used to insert 4-second delay between dialed numbers.
9. Charge Contacts: Used for charging the handset battery.
10. Microphone: Used for speaking with callers.
11. VOL (Volume) /
set to either high, medium or low. In program, memory and predial mode, it is used for
changing mode and moving the cursor to the left during edit mode.
12. C. BACK (Call Back) Button: Allows you to callback the phone number in Call Record
list, memory and predial mode.
1
2
3
4
5
6
7
8
(Figure 1)
(Shift Left) Button: In talk mode, it allows you to adjust the hand-
17
16
15
14
13
12
11
10
9
8