Lowrance HDS Gen3 Operator's Manual page 52

52
Edit a route from the chart panel
1.
Select the route to make it active.
2.
Select the route edit option in the menu.
3.
Position the new routepoint on the chart panel:
- If you set the new routepoint on a leg, a new point is added
between existing routepoints.
- If you set the new routepoint outside the route, the new
routepoint is added after the last point in the route.
4.
Drag a routepoint to move it to a new position.
5.
Save the route by selecting the save option in the menu.
Note:
Ú The menu changes depending on the selected edit
option. All edits are confirmed or cancelled from the menu.
Creating routes using existing waypoints
You can create a new route by combining existing waypoints from
the Routes dialog. The dialog is activated by using the Routes tool
on the Home page.
Waypoints, Routes, and Trails | HDS Gen3 Operator Manual