Melitta Mill & Brew MEMB1B, Mill & Brew MEMB1W User Manual page 9

Brewing Coffee - Programming Delay Timer
1. Follow steps 1 — 6 in BREWING COFFEE — IMMEDIATE START
and 1-3 in PROGRAMMING THE MILL.
2. Be sure clock is set to the current time (see SETTING THE CLOCK
instructions on Page 6).
3. Press and hold the Timer Button, ,until the Timer Light appears
and the display reads 12:00. Use the Hour and Minute Buttons,
and , to set the desired programmed time. A small dot will appear
in the upper left corner of the display to signify A.M. No visible dot
indicates P.M.
4. The timer display will flash 5 times then switch back to the current
time of day. Press and release the Timer Button,
grammed time is now set and the Timer Indicator Light will turn on to
indicate the timer has been reset.
NOTE: The programmable function must be reset after each programmed
use.
8
. The pro-