Cable Modem Leds - Ubee DDM3513 User Manual

Ubee DDM3513 Cable Modem User Guide, v10_30_10

2.6 Cable Modem LEDs

This section describes the functions of the cable modem's LEDs and connectors. When the Power and Ready
LEDs are illuminated, the cable modem is working properly. The following tables provide an overview of the
LEDs on the front of the cable modem and what each LED represents.
Note: The above LED pattern indicates Online Ready (Green), 2 to 4 Bonded Downstream Channels Being
Used (Blue) for Increased Speed to the Internet/Cable Network, 1 Upstream Channel (Green), 1000Mbps
Ethernet (Blue), and Power ON (Green).
LED Name
Provisioning State
Driver init
DS scanning
DS locked
US ranging
US ranged
IP Init & Registration
(& Firmware Upgrade)
Network
Access
Enabled
Operational
Network
Access
Disabled
Cable interface traffic
(network access
enabled)
Ethernet connected
Ethernet traffic
Ubee Interactive
Ready
single
off off
off blink
off
off
off
blink
on on
off on
on on
depends on provisioning state
depends on provisioning state
DS
bonded single
on
on
on
on
on on
on on
on on
US
Ethernet
bonded
off off
off
off
blink
on
depends
on
on
Ethernet
status
on
on
depends
on
on
Ethernet
status
on
blink
Power
on
on
on
on
on
on
on
on
on
on
on
9