Table of Contents
Advertisement
2-18
Keys, Doors, and Windows
2. Place the ignition in ACC/
ACCESSORY or ON/RUN/
START.
3. From any partial open position,
close the window and continue
to pull the switch briefly after the
window has fully closed.
The window is now reprogrammed.
Obstacle Detection Feature
The obstacle detection feature is
part of the express-up feature and is
active:
In the middle and upper portions
of the window opening.
During window up movements.
In ignition OFF during window
up movements and during
express-up in ignition ON/RUN/
START.
If there is something blocking the
window during automatic closing,
the window will reverse direction for
a short distance. Weather conditions
may cause the window to
auto-reverse. The window will return
to normal operation once the object
or condition is removed.
If conditions prevent the window
from closing and the window
continues to auto-reverse, it is
possible to close the window by
activating the express override.
Hold the window switch in the
partially or fully pulled position.
Release of the switch from the
partially pulled up position will cause
the window to stop. Release of the
switch from the fully pulled position
will activate the express-up and
related obstacle detection features.
Warning
If express override is activated,
the window will not reverse
automatically. You or others could
be injured and the window could
be damaged. Before you use
express override, make sure that
all people and obstructions are
clear of the window path.
Rear Window Lockout (Crew
Cab Only)
This feature prevents the rear
passenger windows from operating,
except from the driver position.
Z
Press
to activate the window
lockout. The indicator light in the
switch will illuminate when
activated.
Z
Press
again to deactivate the
lockout switch.
If the indicator light flashes, the
feature may not be working properly.
Advertisement
Chapters
Table of Contents
