GE DDE7500G Use And Care Manual page 12

The Problem Solver
PROBLEM
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
If you need more help.. call, toll free:
GE bswer Center"
consumer information service
(continued)
POSSIBLE CAUSE AND WMEDY
Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
. Failure to use fabric softener. Proper use of fabric softener will minimize wrintiing.
If unsuccessful, retumble on high heat for 10-12 minutes and hang immediately.
. Iron carefully.
remain which cannot be removed?
y
out wrirdded, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it's the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
procedures and Permanent Press clothes still come
12