Ardirection - GE AMV12 Use And Care & Installation Manual

OPERATINGYOUR CONTROLS
(continued)
For ventilation
The cooling effect is reduced when the vent is open.
Use
open vent
position for air
exhaust
Close vent
to filter and
recirculate air
1
Freezingup
If you notice that your air conditioner is not cooling as
it should, it may be that ice has formed on the cooling
coils. The ice blocks air flow and stops the unit from
cooling the room. This "freezing up" is a temporary
condition that most often occurs at night when the
Thermostat is set on the coldest setting and the Selector
is set on LO COOL.
To correct the condition, set the Seiector at HI FAN
or HI COOL with the Thermostat at 1 or 2.
Inside air
feels
uncomfortable
c
Outside air
temperature
dropping
To adjust the air direction
Up, down or
straight out
Side-to-
side
Fingertip pressure
adjusts the air
direction up, down
or straight out.
CIRCUfA/RE
OFF
ml
ON
For fixed side-to-side air direction, set the
Circulaire Switch to ON until the desired air direction
is obtained, then move it to OFF.
For continuous side-to-side air circulation,
set
the
Circulaire Switch to ON and leave it there.
4