Using The Oven Controls - GE JKS05 Owner's Manual

Using the oven controls.

Throughout this manual, features and appearance may vary from your model.
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Press this pad to select the bake function.
OVEN LIGHT ON/OFF Pad
Press this pad to turn the oven light on
or off.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for the
timer on automatic oven operations.
If "F — and a number or letter" flash in the display
and the oven control signals, this indicates a
function error code. Press the CLEAR/OFF pad. Allow
the oven to cool for one hour. Put the oven back into
operation. If the function error code repeats, disconnect the
power to the oven and call
for service.
If a flashing time of day is in the display, you have
experienced a power failure. Reset the clock.
If your oven was set for a timed oven operation when
the power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when the
oven is first turned on.
START Pad
Must be pressed to start any cooking or
cleaning function.
COOKING TIME Pad
Press this pad and then press the number
pads to set the amount of time you want
your food to cook. The oven will shut off
when the cooking time has run out.
DELAY START Pad
Use along with COOKING TIME pad to set
the oven to start and stop automatically at a
time you set.
CLOCK Pad
Press this pad before setting the clock.
KITCHEN TIMER ON/OFF Pad
Press this pad to select the timer feature.
CLEAR/OFF Pad
Press this pad to cancel ALL oven
operations except the clock and timer.
HOUR and MIN + and – Pads
Press these pads to set times up to 9 hours
and 59 minutes—for example, the time of
day on the clock, the timer, the starting and
length of cooking time for timed bake .
TEMP + and – Pads
Press these pads to set the cooking
temperature you want to use.
BROIL HI/LO Pad
Press this pad to select the broil function.
5