Installing The Microsoft Windows Small Business Server 2011 Standard Operating System - Lenovo ThinkServer TD350 Operating System Installation Manual

6. Read the license terms and select I accept the license terms. Then, click Next.
7. Select the type of installation as you need. The following steps are based on the scenario that Custom
(Advanced) is selected in this step.
8. Depending on the configuration, do one of the following:
• If the server configuration is set as RAID, do the following:
a. In the Where do you want to install Windows? window, connect the USB storage device that
contains the driver to your server and then click Load Driver.
b. When the Load Driver window is displayed, click Browse to go to the folder where the driver
is stored.
c. Click OK. The Select the driver to be installed window is displayed.
d. Select Hide drivers that aren't compatible with the hardware on this computer, and then
select the driver that you want to install on your server. Click Next.
• If the server configuration is set as IDE or AHCI, go to next step.
Note: For server models with the AHCI configuration, ensure that you install AHCI drivers after
operating system installation. See "Installing the driver for the SATA AHCI" on page 43.
9. In the Where do you want to install Windows? window, click Drive options (advanced).
10. Select the hard disk drive on which you want to install the operating system, and then click New.
11. Type the amount of space (in MB), and then click Apply.
12. In the Install Windows window, click OK.
13. Go back to the Where do you want to install Windows? window. Ensure that the drive partition is
correct, and then click Next. The installation begins.
Note: Your server restarts several times during the installation.
14. Change your password when prompted.
Note: The password must be a combination of upper case letters, lower case letters, and numbers.
15. Follow the instructions on the screen to log in to the operating system when prompted.
Installing the Microsoft Windows Small Business Server 2011 Standard
operating system
To install the Microsoft Windows Small Business Server 2011 Standard operating system, do the following:
Note: Before you install this operating system, connect your server to the network.
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. If the message Press any key to boot from CD or DVD is displayed, press any key. If the message Windows
Setup [EMS Enabled] is displayed, press Enter. Wait several minutes for the system to load the files.
3. In the Installing Windows window, configure the language and other options as you need and then
click Next.
4. Click Install now.
5. Read the license terms and select I accept the license terms. Then, click Next.
6. Select the type of installation as you need. The following steps are based on the scenario that Custom
(Advanced) is selected in this step.
7. Depending on the configuration, do one of the following:
• If the server configuration is set as RAID, do the following:
.
Chapter 2 Installing an operating system in legacy mode
7