How To Use The Ice Cream Maker; Safety Measures - Ide Line Ice Cream Maker 746-080 User Manual

INTRODUCTION
To get the best out of your new ice cream
maker, please read through these
instructions carefully before using it for the
first time. We also recommend that you
keep the instructions for future reference,
so that you can remind yourself of the
functions of your ice cream maker.

SAFETY MEASURES

• The motor unit, cord or plug must not
be placed in water or any other liquid.
• Never touch the appliance, cord or plug
with wet or damp hands.
• Never leave the appliance unattended
when it is switched on. Children should
be supervised when using it.
• Always remove the plug from the power
socket when the appliance is not in
use.
• Avoid pulling the cord when removing
the plug from the socket. Instead, hold
the plug. Keep the cord and appliance
away from heat sources, hot objects
and naked flames.
• Never use the appliance if it, the cord or
plug is damaged or if the appliance is
not functioning correctly. Only use
accessories manufactured or
recommended by the manufacturer.
• The appliance is for indoor use only.
• Never try to repair the appliance
yourself. If the appliance, cord or plug
needs to be repaired, it should be taken
to an authorised service centre.
Contact your retailer if the repairs fall
under the terms of the guarantee.
UK
KEY TO THE ICE CREAM MAKER PARTS
1. Motor unit
2. On/off button
3. Spindle
4. Lid
5. Paddle
6. Bowl
7. Cord and plug
8. Locking device
9. Filling hole
10. Dowel (one on each side)
BEFORE USING THE ICE CREAM
MAKER FOR THE FIRST TIME
1. Remove all packaging material.
2. Clean all parts of the machine before
using it for the first time (see "Cleaning"
section).
3. Place the bowl (6) in a freezer, and
leave it there for at least 8 hours, until
you are ready to make ice cream.

HOW TO USE THE ICE CREAM MAKER

1. Fit the spindle (3) into the motor unit (1).
2. Fit the motor unit into the lid (4), so the
dowels at the front and sides of the
motor unit fit into the slots in the lid.
3. Fit the paddle (5) onto the spindle.
4. Remove the bowl (6) from the freezer.
5. Lower the lid with motor unit, spindle
and paddle down into the bowl, so the
two locking devices (8) are opposite the
two dowels (10) on the inside of the
bowl.
6. To lock the lid firmly in place on the
bowl, push the locking devices
outwards, i.e. away from the motor unit,
until they connect with the dowels.
7. You can now switch the ice cream
maker on using the on/off button (2).
11
1.
2.
7.
3.
8.
4.
9. 8.
5.
10.
6.