Other Tips; Dca Faders - Yamaha DM2000-v2 Short Cut List

Other Tips

1. GROUP ASSIGN
The default settings of USER DEFINED KEY bank F is for INPUT GROUP ASSIGN
functions. Keys 1-8 are for Input FADER GROUPS, and Keys 9-16 are for Input
MUTE GROUPS. To assign a channel to a group, select the channel and press the
relevant USER DEFINED KEY in BANK F. The USER DEFINED KEY will then light
up to confirm the assignment.
NOTE
A Channel cannot be in more than one FADER GROUP at a time, and
cannot be in more than one MUTE GROUP at a time.

2. DCA FADERS

To have DCA (or analog VCA) style Fader Masters, first check the INPUT FADER
MASTER box near the top of the FADER GROUP display page. Then choose a
REMOTE FADER LAYER, and select USER ASSIGNABLE LAYER as the TARGET.
After that, all the GROUP MASTER FADERS can be selected to appear on the
REMOTE FADER LAYER, along with any other channels chosen by the user.
3. MUTE MASTER Switches
USER DEFINED KEY bank G, by default, consists of the twelve MUTE GROUP
MASTER switches. But first the INPUT MUTE MASTER and OUTPUT MUTE
MASTER boxes must be checked in the GROUP display menu.