Table of Contents
Advertisement
CPU Q-Fan Function [Disabled]
Allows you to enable or disable the CPU Q-Fan function. Configuration options: [Disabled]
[Enabled]
Chassis Q-Fan Function [Disabled]
Allows you to enable or disable the Chassis Q-Fan function. Configuration options: [Disabled]
[Enabled]
2.6
Boot menu
The Boot menu items allow you to change the system boot options. Select an item then
press <Enter> to display the sub-menu.
Main
Advanced
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
2.6.1
Boot Device Priority
1st ~ xxth Boot Device
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system. Configuration options: [Removable Dev.] [Hard Drive]
[ATAPI CD-ROM] [Disabled]
• To select the boot device during system startup, press <F8> when ASUS Logo appears.
• To access Windows
•
•
2.6.2
Boot Settings Configuration
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to
decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the
POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature. Configuration
options: [Disabled] [Enabled]
ASUS AT3IONT-I Series
BIOS SETUP UTILITY
Power
Boot
OS in Safe Mode, do any of the following:
®
Press <F5> when ASUS Logo appears.
Press <F8> after POST.
Tools
Exit
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
first boot device.
2-13
Hide quick links:
Advertisement
Table of Contents
