GE Monogram ZHU30RSR Dimension Manual

ZHU30RSR
GE Monogram
Dimensions and Installation Information (in inches)
1-3/4"
Min.
D
2-1/2"
Min.
to Front
Edge
Cutout Dimensions:
30" Models A B
ZHU30RSR 29-3/4" 21-3/8" 28-1/2" 19-5/8"
Electrical requirements
Product rating is 120/240V, 60Hz, 36" cooktops
to a 50-amp circuit; and 30" cooktops to a 40-
amp circuit. The cooktops must be connected
to a supply circuit of the proper voltage and
frequency and protected by a time-delay fuse or
circuit breaker.
All models require 12" minimum clearance below
the cooktop bottom to combustible materials.
For answers to your Monogram,
GE appliance questions, visit our website at
®
geappliances.com or call GE Answer Center
service, 800.626.2000.
30" Electric Induction Cooktop
®
A
B
C
C D
269Dia1
GE Profile or
® ™
®
2" Min.
to Side Walls
3-1/4"
Combination installations
Consideration must be given to electrical supply locations
when the cooktop is installed with other products in the same
cabinet. Always refer to each product's installation instructions
for clearances and electrical requirements.
• Install these cooktops with any exhaust hood of the same
or treater width; 300 CFM or greater air flow rating is
recommended.
• Install the 36" cooktop with a 36" downdraft vent. See
downdraft vents for details.
• A Monogram single oven (except Trivection oven) may be
installed below these cooktops.
The serial plate is located on the bottom of the cooktops.
16" Min
Junction
Box
269Dia2
557ZEU669
Specification Revised 9/10
6-1/4"
5-1/2"
Listed by
Underwriters
Laboratories
130257