Installation; Unpacking The Switch; Package Contents; Unpacking Steps - Dell S6000-ON Getting Started Manual

Installation

Unpacking the Switch

This section describes the package contents and the steps to unpack the S6000-
ON switch.

Package Contents

When unpacking each switch, make sure that the following items are included:
• One S6000-ON switch
• One RJ-45 to DB-9 female cable
• Two sets of rail kits (no tools required)
• Two PSUs
• One AC power cord (country/region specific)
• Getting Started Guide
• Safety and Regulatory Information
• Warranty and Support Information
• Software License Agreement

Unpacking Steps

NOTE:
Before unpacking the switch, inspect the container and immediately report
any evidence of damage.
Step Task
Place the container on a clean, flat surface and cut all straps securing the container.
1
Open the container or remove the container top.
2
Carefully remove the switch from the container and place it on a secure and clean
3
surface.
Remove all packing material.
4
Inspect the product and accessories for damage.
5
4
11
Installation