Electrolux 267200 Installation And Operator's Manual page 9

Fast compartment cooling: useful for going from
one type of cooking to another at lower temperature;
it enables fan rotation and automatic injection of
water (TS < 180°C) even with the door open.
Attention! Risk of burns.
Always open the door with caution when
the oven is hot.
Continuous cooking: the cooking time is endless,
therefore it is necessary to press STOP when the
food is cooked.
MM:MINUTES and SS:SECONDS for short cooking
cycles. Converts minutes into seconds and the letter S
appears next to the number in the bar as an indicator
INFORMATION - NOTES - WARNINGS
Warning light signalling oven door open.
Scale indicator: when this light comes on, the steam
generator must be descaled. Follow the instructions
given in par. 6.1.
Steam generator status light:
- generator in fi lling phase or no water. Make sure
water reaches the oven!
- generator in preheating phase.
- generator ready (indicator light off).
Error
Attention
Information
Queries
UTILITIES
Information area
Area displaying current
Status, Error, Warning
and Utility information.
MULTIPHASE
39
Low speed cycle (fan): for gentle baking,
such as light patisserie. Combinable with all
cycles.
Pulsed speed cycle (fan): for low tempera-
ture cooking, ideal for maintaining cooked
products, dehydrating or drying for vegetables
or fi nishing food. Combinable with all cycles.
Normal speed cycle (fan): for normal cooking.
Ideal for roasting, gratinating and classic
cooking. Combinable with all cycles. (Default
setting)
Manual injection of water in compartment:
for instantly increasing the humidity level
during a cooking cycle. Use the + and - buttons
to adjust the injection duration in seconds (10
s intervals).
Low power cycle (heating): for gentle baking, such
as light patisserie. Combinable with all cycles.
FSC-STANDARD risk cooking: for foods having a
low contamination level.
FSC-HIGH risk cooking: for foods having a high
contamination level.
FSC- The FOODSAFE CONTROL had positive results,
cooking occurred in safe conditions
Save Program
Multitimer: for setting cooking of foods at the same
temperature but at different times (max. 14).
Cooking with phases in sequence: for setting cooking
programs with several phases in automatic sequence
(max. 15 phases).
Active pause phase
Add pause phase: by entering a time value in this
mode it is possible to delay the start of cooking pro-
grams or include a pause between two cycles (e.g.
proving).
GB