Breville Quick Time BIC300 Instruction Booklet page 15

OPERATING yOUR BREvILLE - THE QUICK TIME PAGE HEAdER.....
8. When cooking is complete, press the
power on/off button once to the
standby mode. A beep will sound. Switch
'off' at the power outlet and unplug the
power cord.
NOTE
Temperature can be adjusted at any
time during the cooking process,
and the Breville induction cooker
temperatures can be lowered or
increased on a scale of 60˚C to 220˚C.
TIMER MOdE
1. Power level and/or Adjustable
temperature mode must be selected
prior to setting the Timer mode.
2. To select the Timer mode, press the
mode button once, a corresponding
indicator light will illuminate on the
LED screen adjacent to the timer mode
icon. A beep will sound.
3. Select the desired Time using the Control
dial. Turn dial clockwise to increase time
and anti-clockwise to decrease time. The
time is adjustable on a scale from
1 minute to 180 minutes. A beep will
sound each time the timing is changed.
4. During the selection period, the
LED screen will continue to flash,
when the desired time has been
selected, the LED screen will cease
flashing after approximately 5 seconds
and display selected.
14
™
NOTE
Turning the control dial slowly
increases or decreases the timing
by 1 minute increments, allowing
for accurate selection. A beep will
sound each time the time is changed.
Turning the control dial very quickly
clockwise increases timing by
10 minute increments, anticlockwise
decreases increments by 10 minute
increments fast motion selection.
5. Timer count down then commences
and when the selected time has lapsed,
a beep will sound 5 times and the
induction cooker will automatically
switch to stand-by mode.
NOTE
The Timer mode does not need to be
set to use the Power level mode or
Adjustable temperature mode.
To readjust power level and
temperature during cooking with
timer mode, switch off the appliance,
switch back on and reset.
WARNING
If the Breville induction cooker detects
the temperature on the glass ceramic
plate surface exceeding 100°C during
cooking, the heating process will cease
and the stand-by mode will activate for
60 seconds to reduce the temperature.
At the same time, the LED screen will
display the error message E6. This
error message will turn off when the
temperature falls below 100°C.