How To Use Your Camera; Inserting Batteries; Turn On The Camera; Taking Still Pictures/Setting The Resolution Mode - Meade Binocular and Digital Camera Operating Instructions Manual

00 Discovery version 8x22 #2
2. Select an object that is at least 30 feet (10m) away.
3. Viewing with just your left eye, turn the Center Focus Knob (2, Fig. 1a) until
the object you are viewing is focused.
4. Viewing with just your right eye, turn the Diopter Knob (1, Fig. 1a) until the
object you are viewing is also in focus.
5. Objects can now be brought into focus by turning the Center Focus Knob.
III. How To Use Your Camera
CaptureView II performs best under good lighting conditions. It also takes some
practice to get used to high-magnification photography. We suggest that you take
some time to practice capturing and downloading pictures. Depending on the
available light and your distance from the object, captured images may not
appear as bright or centered exactly as viewed through the binoculars.

Inserting Batteries

1. To remove the battery compartment lid (10, Fig. 1b), gently pull to the
rear and upward.
2. Insert 2 AAA-size batteries into the compartment, noting correct
polarity as illustrated inside the compartment.
Important Note: Download pictures to your PC before removing the
batteries. Removing the batteries will erase your images. Also, be sure
CaptureView II is off before changing the batteries.

Turn on the Camera

1. Press the Mode button (4, Fig. 1a) to turn on the camera.

Taking Still Pictures/Setting the Resolution Mode

1. Turn on the camera.The LCD displays "00;" this is the picture taking
mode.
2. Before taking a picture, select a picture resolution: Press the Mode
button repeatedly until the High Resolution "Hr" icon displays. (The
first time you use the camera, the Hr icon displays. Subsequently, the
camera, when it is powered-up, displays the last Resolution setting you
have chosen.) Press the Shutter button (5, Fig. 1a) if you wish to
change to the Low Resolution mode (the "Lr" icon will display). After
L
the desired resolution icon displays, press the Shutter button to select
that mode; a beep sounds to confirm the selection. The mode selected
displays on the LCD.
Note: If you are in Hr resolution, the self-timer mode will also be in Hr
resolution, etc.
3. Sight on a target using the binocular.
Page 3
8/14/03 4:09 PM Page 3