Directing The Display Output When You Turn On The Computer - Toshiba Satellite L550 Series User Manual

Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1
2
3
4
5
6
NOTE

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1
2
Downloaded from LpManual.com Manuals
Read the directions that came with the monitor to see if you
first need to install new software.
Connect the monitor's video cable to the RGB (monitor) port
on the side of the computer.
Connect the device's power cable to a live electrical outlet.
Turn on the external device.
Your computer will automatically detect the external display
device and activate a screen with display options.
Select the settings you desire and click Apply.
Click OK.
In the future you can change the display settings by pressing
or by configuring the display properties settings.
Some modes are only available with the appropriate device attached
and turned on.
Fn +
Press Fn and F5 simultaneously.
While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order:
Built-in display only
Built-in display and external monitor simultaneously
Using external display devices
F5 ):
, press repeatedly until the setting
Fn F5
Getting Started
79
,
Fn+F5
F5