Table of Contents
Related Manuals for Navnet TZtouch2 TZT12F
Summary of Contents for Navnet TZtouch2 TZT12F
- Page 1 System Overview...
-
Page 2: Table Of Contents
INDEX 1. NavNet TZtouch2 Replacement from NavNet vx2 – Front Mounting for Model TZTL12F Model TZT12F and TZTL15F Replacement from NavNet 3D – Front Total Control, Simply Refined… Mounting for Model TZTL12F 2. Product Overview Front Mounting for Model TZTL15F... -
Page 3: Navnet Tztouch
1. NavNet TZtouch2 Model TZT12F and TZTL15F NavNet TZtouch2, the second generation of NavNet TZtouch series, has two (2) models: TZTL12F (12.1”-diag) and TZTL15F (15.6”-diag). This document describes the overview of these new models. TZTL12F Model: TZTL15F Model: Total Control, Simply Refined…... - Page 4 Built-in RezBoost™ Fish Finder RezBoost™ is a revolutionary new technology built-in to TZT2, to produce high-definition Fish Finder echo resolution and separation. By utilizing conventional narrowband transducers, echo images will be up to 8x sharper, thanks to advanced post signal processing. It also saves money by allowing customers to use their existing installed transducers to achieve enhanced clarity and sharper targets.
-
Page 5: Product Overview
2. Product Overview Appearance The TZTL12F/15F MFDs provide a large screen for their bezel size, thanks to minimized hardware keys. The rear side is slimmer, lighter and much more water-resistant than any other Furuno MFD! The glass face is impervious to water! Front View Items Descriptions... -
Page 6: Specifications
1100 cd/㎡ Brilliance Touch Screen Multi touch Chart *(1) Mapmedia mm3d format (same charts as NavNet 3D and NavNet TZtouch) Chart Storage *(1) microSDXC (microSD/HC/XC) (128GB included), USB Wireless LAN Built-in (for Internet and iOS/Android™ apps) Built-in high sensitivity with internal patch antenna... - Page 7 TZTL12F TZTL15F Maximum 4 displays networked via Ethernet, Will network with TZtouch, but will not Qty of Network Display network with NavNet 3D or vx2 (see section 6-8, 6-9, 6-10) Network Sensors Limitation: No Ethernet connection with FAR-2xx7/FCV1150 Camera Analog video input only (NO IP camera)
-
Page 8: Comparison With Navnet Tztouch
Operator’s Manual User guide (eGuide) built-in (HTML) NavNet Viewer Compatible Apps *(1) NavNet Controller Note: (1) The TZTL12F/15F is NOT compatible with the NavNet Remote app. Comparison with NavNet TZtouch General TZTL12F/15F TZT9/14/BB LCD Size 12.1”-wide / 15.6”-wide 9”-wide / 14.1”-wide / BB 1280×800 (WXGA: Wide-XGA) /... - Page 9 NO Radar echo trail/average Radar echo trail/average available Others TZTL12F/15F TZT9/14/BB Ethernet FUSION-Link Ethernet NMEA2000 (Future Update) Operator’s Manual User guide (eGuide) built-in (HTML) Not built-in (NavNet Remote NOT compatible) NavNet Remote Compatible Apps NavNet Viewer NavNet Viewer NavNet Controller NavNet Controller...
-
Page 10: Operating Navnet Tztouch
3. Operating NavNet TZtouch2 The TZTL12/15F User Interface is similar to the NavNet TZT9/14/BB but has refined operational features. This section provides an overview of the key operational differences. Multi Touch Control The TZTL12F/15F can be controlled by multi touch operation. In addition to smooth pinch-to-zoom, a generously sized “Slider Bar”... -
Page 11: More Information By Eguide
The TZTL12F/15F with built-in wireless LAN offers multiple features and solutions. NavNet Viewer and NavNet Controller Apps The TZTL12F/15F supports the NavNet Viewer and NavNet Controller apps. Utilize your Android Mobile keypad with the NavNet Controller App for wireless remote operation. Comparison Table NavNet Remote... - Page 12 Internet – Weather and Software Download Connected to the Internet, TZT2 MFDs have unlimited free access to an incredible weather download service just like the TZT9/14/BB. Weather forecast up to 16 days is available from NavCenter and can be displayed on the dedicated Weather page of the TZTL12F/15F.
- Page 13 5. Installing NavNet TZtouch2 Dimensions TZTL12F – Flush Mount from Rear Side (Standard) TZTL12F – Bracket Mount (Option: OP19-13 / P/N 001-337-410-00) TZTL15F – Flush Mount from Rear Side (Standard)
- Page 14 TZTL15F – Bracket Mount (Option: OP19-14 / P/N 001-337-420-00) SDU001 (Option)
- Page 15 Replacement from NavNet vx2 – Front Mounting for Model TZTL12F 10.4” NN1/VX2 display to TZTL12F with OP05-15 (001-337-430-00) A 10.4” NN1/VX2 display has a larger cutout hole than a TZTL12F. The adapter panel OP05-15 (Part # 001-337-430-00) helps to fill the hole and install the TZTL12F from the front side. While both OP05-15 (001-337-430-00) and OP-16 (001-337-440-00) in Section 5-3 work as front mounting panels, the OP05-15 (001-337-430-00) below is recommended due to its smaller size.
- Page 16 Replacing a NavNet 3D MFD12 – Front Mounting for Model TZTL12F MFD12 to TZTL12F with OP05-16 (001-337-440-00) The MFD12 has a larger cutout hole than a TZTL12F. The adapter panel OP05-16 (Part # 001-337-440-00) helps to fill the hole and install the TZTL12F from the front side. While both OP05-15 (001-337-430-00) in Section 5-2 and OP-16 (001-337-440-00) works as front mounting panels, the OP05-15 (001-337-430-00) is recommended due to its smaller size.
-
Page 17: Front Mounting For Model Tztl15F
Front Mounting for Model TZTL15F The OP19-17 (Part number 001-337-450-00) can be used to mount the TZTL15F from the front side. -
Page 18: Pigtail Cables
Pigtail Cables Pigtail 1 shown at left is packaged by most frequently used cables, while pigtail 2 is mainly for optional interconnections. Each cable is labeled with its port name. You can easily find an appropriate port on the pigtail cables. Label Remarks NETWORK... -
Page 19: Networking Navnet Tztouch
6. Networking NavNet TZtouch2 Compatible Sensors Network Sensors Remarks DRS series, DFF1-UHD, DFF1/3, BBDS1, Not compatible with BBFF1/BBFF3 Ethernet FA30/50, FAX30 No Ethernet network with FAR2xx7/FCV1150 NMEA2000 (See Remarks) Refer to input/output PGN specifications. Output: Refer to output sentence specifications. - Page 20 Utilizing Model SDU001 and MCU002 via the USB Port The microSD reader SDU001 and remote controller MCU002 can be connected via USB. Notes: (1) When both SDU001 and MCU002 are used, arrange a USB hub locally. (2) Use one (1) SDU001 and MCU002 per display.
-
Page 21: Heaving Compensation
Retrofit from NavNet TZtouch Retrofit to TZTL12F/15F Original – TZT9/14 (NavNet TZtouch) In this example, the TZT9/14 units are replaced with TZTL12F/15F. The Ethernet and NMEA2000 network architecture of TZTL12F/15F is same as TZT9/14/BB. You just need to replace the display unit(s). - Page 22 Retrofit from NavNet 3D Retrofit to TZTL12F/15F Original – MFD8/12 (NavNet 3D) In this example, the MFD8/12 units are replaced with TZTL12F/15F. While the TZTL12F/15F can use the same Ethernet sensors as the MFD8/12/BB, the following changes are necessary to cope with more redundant Ethernet and NMEA2000 network architecure.
-
Page 23: Integrated Network With Navnet Tztouch
6-11 Integrated Network with NavNet TZtouch The Ethernet and NMEA2000 network architecture of TZTL12F/15F is the same as TZT9/14/BB. You will still need to network both displays via Ethernet and NMEA2000. Notes: (1) Points and routes are shared automatically on the network.