Linksys WRT160N User Manual page 16

Chapter3
Security Mode > WPA2 Enterprise
Encrypton
WPA2 supports two encryption methods,
TKIP and AES, with dynamic encryption keys. Select the
type of algorithm, AES or TKIP or AES. The default is TKIP
or AES.
RADIUS Server
Enter the IP Address of the RADIUS
server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is 1812.
Shared Secret Enter the key shared between the Router
and the server.
Key Renewal
Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default Key Renewal period is 600 seconds.
RADIUS
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Security Mode > RADIUS
Wreless-N Broadband Router
Advanced Configuration
IMPORTANT: If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or else
your wireless network will not function properly.
RADIUS Server
Enter the IP Address of the RADIUS
server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is 1812.
Shared Secret Enter the key shared between the Router
and the server.
Encrypton
Select a level
40/64 bts (10 hex dgts) or 104/128 bts (26 hex dgts).
The default is 40/64 bts (10 hex dgts).
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key Select which TX (Transmit) Key to use. The default
is 1.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Security Mode > WEP
Encrypton
Select a level
40/64 bts (10 hex dgts) or 104/128 bts (26 hex dgts).
The default is 40/64 bts (10 hex dgts).
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key
Select which TX (Transmit) Key to use. The default
is 1.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
of WEP encryption,
of WEP encryption,
14