Compass Page Options; Using The Course Pointer Or Bearing Pointer - Garmin GPSMAP 60Cx Owner's Manual

Compass Page Options

Use the options menu to customize the Compass
Page. With the Compass Page open, press MENU. To
select an option, highlight it, and press ENTER.
Compass Page Compass Page
Options Menu Options Menu
The following options are available:
• Stop or Resume Navigation—turns active
navigation for a route or a Go To on or off.
• Recalculate— recalculates the destination path.
• Course or Bearing Pointer—toggles between
the course arrow and the bearing pointer.
• Data Fields—allows you to select the number
of data fields that appear on the Compass Page.
GPSMAP 60Cx Owner's Manual
• Change Data Fields—allows you to select the
type of data you want to show in the data fields.
See page 76 for descriptions for each option.
• Restore Defaults—returns to the factory
settings.
Using the Course Pointer or Bearing
Pointer
The bearing pointer and course pointer work
independently of each other. The bearing pointer
indicates the direction to your destination, and the
course pointer indicates your relationship to a course
line leading to the destination.
If the bearing pointer arrow is pointing straight up, for
example, you are going directly to your destination.
If it points any direction other than up, turn toward
that direction until the arrow is pointing up and then
continue in that direction. The bearing pointer always
points to the destination, regardless of the direction
you are moving. This is most efficient if you must
move around obstacles (for example, lakes or private
property) in your path.
M P > c P
AIn Ages oMPAss Age