Advertisement
DANGER;
if a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department,
Gasleakingfrom
cracked/cut/burned
hose.
Gasleakingfrom LP
cylinder.
Gasleakingfrom LP
cylindervalve.
Gasleakingbetween
LP cylinderand
regulatorconnection.
Firecomingthrough
controlpanel.
Greasefire or
continuousexcessive
flamesabovecooking
surface.
• Damagedhose.
• Mechanical f ailuredue to rustingor
mishandling.
• Failureof cylindervalve from
mishandling or mechanical f ailure.
• Improperinstallation, c onnectionnot
tight,failureof rubberseal.
• Firein burnertube sectionof burnerdue
to blockage.
•Toomuchgreasebuildupin burnerarea.
•Turnoff gas at LP cylinderor at sourceon naturalgassystems.If
anythingbut burned,replacevalve/hose/regulator. If burned,
discontinueuseof productuntila plumberhas investigated cause
and corrections are made.
• ReplaceLP cylinder.
•Turnoff LP cylindervalve.ReturnLP cylinderto gassupplier.
•Turnoff LP cylindervalve.Removeregulatorfrom cylinderand
visuallyinspectrubbersealfor damage.See LP CylinderLeakTest
and ConnectingRegulator to the LP Cylinder.
•Turnoff control knobsand LP cylindervalve.Leavelid opento
allowflamesto die down.After fire is outand grill is cold,remove
burnerand inspectfor spidernestsor rust.See NaturalHazard
and Cleaningthe BurnerAssemblypages.
•Turnoff control knobsand LP cylindervalve.Leavelid opento
allowflamesto die down.After cooling,cleanfood particlesand
excessgreasefrom insidefireboxarea,greasetray,and other
surfaces.
Troubleshooting
Burner(s)will not light
usingignitor.
(See ElectronicIgnition
Troubleshooting a lso)
Continuedon next
page.
GASISSUES:
•Tryingto lightwrongburner.
• Burnernot engagedwith controlvalve.
• Obstruction in burner.
• Nogas flow.
•Vaporlock at couplingnutto LP cylinder.
• Couplingnut and LP cylindervalve not
fully connected.
ELECTRICALISSUES:
• Electrode crackedor broken;"sparksat
crack."
• Electrode tip notin properposition.
•Wire and/orelectrodecoveredwith
cookingresidue.
•Wires are looseor disconnected.
•Wires are shorting(sparking)between
ignitorand electrode.
• Deadbattery.
• Seeinstructionson control paneland in Useand Caresection.
• Makesurevalvesare positioned insideof burnertubes.
• Ensureburnertubesare not obstructed with spiderwebsor other
matter.See cleaningsectionof Useand Care.
• MakesureLP cylinderis not empty.If LP cylinderis notempty,
referto "Suddendrop in gasflow."
• Fora grill equipped with theAUTO-CLEAN
TM
feature,makesure
theAUTO-CLEAN
TM
valve is set to "Grill"
•Turnoff knobsand disconnect c ouplingnut fromLP cylinder.
Reconnect a nd retry.
•Turnthe couplingnutapproximately one-halfto three-quarters
additional t urn untilsolidstop.Tightenby handonly- do not use
tools.
• Replaceelectrode(s).
MainBurners:
•Tip of electrodeshouldbe pointingtowardgasport openingon
burner.The distanceshouldbe 1/8"to 1/4".Adjust if necessary.
Sideburner:
•Tip of electrodeshouldbe pointingtowardgasport openingon
burner,the distanceshouldbe 1/8"to 3/16".Adjust if necessary.
• Cleanwireand/orelectrodewith rubbingalcoholand cleanswab.
• Reconnect w iresor replaceelectrode/wire assembly.
• Replaceignitorwire/electrode assembly.
• Replacewith a newalkalinebattery.
25
Advertisement
