Telephone operation
Switching the phone ON/OFF
Switching ON
The telephone is switched ON automatical-
ly when COMAND is activated. The cellular
phone must be readily inserted into the
cradle.
If COMAND is switched ON, the switched
OFF telephone can also be switched ON
manually:
Press and hold for a few seconds
until the telephone is switched ON.
The Telephone main menu appears
( page 89).
One of the following messages could also
appear:
Please insert phone
Insert the cellular phone into the
cradle.
Phone not installed
Your vehicle is not configured for cellu-
lar telephone operation.
Please insert SIM card
This message appears only when using
a GSM cellular phone.
Insert a SIM card ( Telephone Op-
eration Guide).
Telephone*
Telephone operation
Switching OFF
In the Telephone main menu
( page 89), press and hold for
longer than 2 seconds.
or
Switch COMAND OFF ( page 30).
The telephone switches OFF after a
one-minute delay. If a call is in progress
during this time, the telephone switch-
es OFF approx. one minute after the
call is ended.
i
If a call is in progress (handsfree) you
cannot switch the COMAND OFF, is
disabled.
85