Table of Contents
Advertisement
Your system can be installed with a few easy steps, providing your vehicle comes equipped with a 7-way
connector socket and a standard 2" Hitch Receiver. If your vehicle is not equipped with a 7-way connector, you
can obtain a power connection using the provided 2-pin reverse power hardwire kit and retreive power at the
reverse light harness.
You can begin by inserting the 7way plug
into the vehicle's 7way socket, (Fig.A).
Insert the Sensing Unit into the Trailer
Hitch of the vehicle, (Fig.B).
Use the HitchLock to secure the
2" sleeve and the Sensing Unit into the
vehicle's trailer hitch receiver, (Fig.C).
The RF Receiver will be plugged into the
vehicle's cigarette lighter, or similar 12 volt
port. (Fig.D)
-9-
Advertisement
Table of Contents
