Seat Belt Warning Light/Beep - Mazda 2006 Mazda3 4-Door Owner's Manual

Mazda3_8U55-EA-05G_Edition1 Page33
Tuesday, May 31 2005 1:18 PM
WARNING
Using an Extender That is Too Long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured.
Don't use the extender or choose one
shorter in length if the distance
between the extender's buckle and the
center of the user's body is less than
15cm (6 in).
NOTE
When not in use, remove the seat belt
extender and store it in the vehicle. If
the seat belt extender is left connected,
the seat belt extender might get
damaged as it will not retract with the
rest of the seat belt and can easily fall
out of the door when not in use and be
damaged the seat belt warning light will
not illuminate and function properly.
Form No.8U55-EA-05G
Black plate (33,1)
Essential Safety Equipment
Seat Belt Systems

Seat Belt Warning Light/Beep

The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
Conditions of operation
Condition
The warning light
The driver's seat belt is not
illuminates for about 1
fastened when the ignition
minute and a beep
switch is turned to the ON
sound will be heard
position.
for about 6 seconds.
The driver's seat belt is
The warning light
fastened while the warning
turns off and the beep
light and the beep sound are
sound stops.
activated.
The driver's seat belt is The warning light will
fastened before the ignition not illuminate and the
switch is turned to the ON beep sound will not be
position. heard.
Result
2-19