Table of Contents
Advertisement
The Minute/Second Timer
The Minute/Second Timer has three timing
functions:
It operates as a minute timer.
It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without
microwave energy.
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step 2: Touch number pads 3, 0 and O (for 3 minutes
and no seconds).
Step 3: Touch START. Display shows time counting
down. The timer signals when time is up.
How to Defrost, Hold and Time Cook
Let's say you want to defrost a frozen casserole for
for 25 minutes. Here's how to do it:
Step 1: Take casserole from freezer and place in oven.
Step 3: Touch pads 1, 5, 0 and O for 15 minutes
defrosting time. (Defrosting is automatically set on
power level 3 but can be changed by touching the
POWER LEVEL pad and the desired power level.)
Using a Holding Time
The Minute/Second Timer can also be used to
program a "holding time" between microwave
cooking functions. The time can range from one
second to 99 minutes and 99 seconds. A holding
or standing time may be found in some of your
own recipes or in a cookbook.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds,
touch TIME COOK I & II and enter cook time. Touch
MIN/SEC TIMER and enter number of minutes to
delay cooking. Touch START. Timer will count down
to zero and cooking will begin.
Step 4: Set standing or hold time
MIN/SEC
by touching MIN/SEC TIMER.
TIMER
Step 5: Touch 1,0,0 and O to hold for ten minutes.
Step 6: Touch TIME
TIME COOK
COOK I & 11.
I &II
Step 7: Touch 2, 5, 0 and O for 25 minutes
Step 8: Touch START. As
each function is automatically
START
performed, oven display shows
instructions entered and the
function. When time is up, the
oven signals and flashes "End."
of
9
Advertisement
Table of Contents
