Preface; Specifications - Motorola StarTAC 3000 Service Manual

Cellular Subscriber Group

Preface

Specifications
Function
Frequency Range
Channel Spacing
Channels
Duplex Spacing
Frequency Stability
Operating Voltage
Display
RF Power Output
Input/Output Impedance
Spurious/Harmonic Emissions
Receive Audio Response
Audio Distortion
FM Hum and Noise (C-MSG)
Modulation Type
Transmit Audio Response
Transmit Audio Sensitivity
Receive Sensitivity
© 1998 Motorola, Inc.
Table 1: General
Specification
824.03 - 848.98 MHz Tx
869.03 - 893.98 MHz Rx
30 kHz AMPS (wide), 10 kHz NAMPS (narrow)
832/2412
45 Mhz
+ 2.5 ppm AMPS (wide), + 1.0 ppm NAMPS (narrow)
+4.0 to +5.5 VDC (external connector)
2 lines of 7 digit dot-matrix
0.6 Watts nominal
50 ohms (nominal)
Complies with Title 47, Part 22 of the FCC Code Regulations
6 dB/octave de-emphasis
AMPS: Less than 5% at 1 kHz; + 8 kHz deviation
NAMPS: Less than 5% at 1 kHz; + 2.9 kHz deviation
AMPS: 32 dB below + 8 kHz deviation @ 1 kHz
(C-MSG weighted)
NAMPS: 32 dB below + 2.9 kHz deviation @ 1 kHz
(C-MSG weighted)
F3: +12 kHz for 100% at 1 kHz, AMPS (wide)
+ 5 kHz for 100% at 1 kHz, NAMPS (narrow)
6 dB/octave pre-emphasis
AMPS: + 2.9 kHz deviation (nom.) @ 97 dB SPL input @
1 kHz
NAMPS: +1.5 kHz deviation (nom.) @ 97 db SPL input @
1 kHz
-116 dBm for 12 dB SINAD (C-MSG weighted)
ii
PREFACE
StarTAC 3000