Refrigerator Use - Maytag W10336164A User Instructions

Adjust the Doors
IMPORTANT:
Your refrigerator has two adjustable, front leveling screws –
one on each side of the refrigerator base. If your refrigerator
seems unsteady or you want the door to close easier, use the
instructions below.
Before moving the refrigerator, raise the leveling screws so
the front rollers are touching the floor.
1. Remove the base grille. Grasp the grille firmly and pull it
toward you.
2. Raise or lower the cabinet.
Using a " hex driver, turn the leveling screw on each side to
raise or lower that side of the refrigerator.
NOTE: Having someone push against the top of the
refrigerator takes some weight off the leveling screws. This
makes it easier to turn the screws. It may take several turns of
the leveling screw to adjust the tilt of the refrigerator.
To raise, turn the leveling screw clockwise.
To lower, turn the leveling screw counterclockwise.
A. Leveling screw
3. Open the door again to make sure that it closes as easily as
you like. If not, tilt the refrigerator slightly more to the rear by
turning both leveling screws clockwise. It may take several
more turns, and you should turn both screws the same
amount.
4. Replace the base grille.
8
There are two refrigerator compartment doors. The doors can be
opened and closed either separately or together.
There is a vertically-hinged seal on the left refrigerator door.
The refrigerator and freezer controls are located on the dispenser
panel and display screen.
A
The language of the text on the display screen can be set to
English, Spanish or French.

REFRIGERATOR USE

Opening and Closing Doors
When the left side door is opened, the hinged seal
automatically folds inward so that it is out of the way.
When both doors are closed, the hinged seal automatically
forms a seal between the two doors.
A. Hinged seal
Using the Controls
Display screen
Language Selection
To change the display screen text from English to Spanish or
French, press the HOME button on the dispenser panel. On
the display screen, press OPTIONS, then PREFERENCES,
then LANGUAGE. Select ESPAÑOL (Spanish) or FRANÇAIS
(French), wait 15 seconds or press BACK, and the screen text
will be changed.
To change the display screen text from Spanish to English,
press the HOME button on the dispenser panel. On the
display screen, press OPCIONES, then PREFERENCIAS,
then IDIOMA. Select INGLÉS, wait 15 seconds or press
ATRÁS, and the screen text will be changed.
To change the display screen text from French to English,
press the HOME button on the dispenser panel. On the
display screen, press OPTIONS, then PRÉFÉRENCES, then
LANGUE. Select ANGLAIS, wait 15 seconds or press
RETOUR, and the screen text will be changed.
A