Gigabyte GA-X99-SOC Champion User Manual page 11

Storage Interface (M2_20G and SATA Express connectors can only be used one at a time. The
SATA Express connector becomes unavailable when an M.2 SSD is installed,
but the SATA3 4/5 connectors are still functional.)
- 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI
modes only
(An operating system installed on the SATA3 0~5 ports cannot be used on the
sSATA 0~3 ports.)
USB Chipset:
Š
- 2 x USB 3.0/2.0 ports available through the internal USB header
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Chipset + Renesas
Š
- 4 x USB 3.0/2.0 ports on the back panel
Internal 1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Connectors
Š
1 x 4-pin ATX 12V power connector
Š
1 x OC PEG Power Connector
Š
1 x SATA Express connector
Š
10 x SATA 6Gb/s connectors
Š
1 x M.2 Socket 3 connector
Š
1 x CPU fan header
Š
1 x water cooling fan header (CPU_OPT)
Š
3 x system fan headers
Š
1 x Thunderbolt
Š
1 x OC Panel connector (for future expansion)
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
1 x USB 3.0/2.0 header
Š
2 x USB 2.0/1.1 headers
Š
1 x serial port header
Š
1 x Clear CMOS jumper
Š
1 x power button
Š
1 x reset button
Š
1 x Clear CMOS button
Š
1 x CPU mode switch
Š
1 x OC Trigger switch
Š
1 x DualBIOS switch
Š
1 x BIOS switch
Š
Voltage Measurement Points
Š
Back Panel 1 x PS/2 keyboard port
Š
1 x PS/2 mouse port
Connectors
Š
4 x USB 2.0/1.1 ports
Š
4 x USB 3.0/2.0 ports
Š
1 x RJ-45 port
Š
1 x optical S/PDIF Out connector
Š
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Š
Line Out, Mic In)
uPD720210 USB 3.0 Hub:
®
add-in card connector
™
- 11 - Hardware Installation