Auto Defrost - GE JE925T Use And Care & Cooking Manual

Auto Defrost

With the Auto Defrost feature,
the oven automatically sets the
defrosting times and power
levels for you.
How to Set Auto Defrost
Before you begin, check the guide located on the
inside front of oven when you open the door. It
shows minimum and maximum food weights for a
variety of foods. You will need to know your food
weight before setting Auto Defrost.
Step 1: Remove food from package, place in oven on
microwave-safe dish and close door.
m
Step 2: Touch AUTO DEF. pad.
Step 3: Enter weight. For
example, touch number pads
Conversion Guide below. After
3 seconds "START" flashes.
Stand Time
After Auto Defrosting, meat needs to stmd in order to
let the inside defrost. You may take the food out of the
oven if you wish. Stand time recommendations are
given in the guide on the next page.
14
AUTO DEFROST
Use the Auto Defrost guide on the
next page. Enter the food weight in
pounds and tenths of a pound (see
Conversion Guide below). Then
touch START pad.
defrosting, the oven
beeps 4 times and
Follow the directions in
the Auto Defrost Guide
for what to do at the first and second signal. Then
close the door and touch START pad.
and oven beeps 4 times. "End" remains on display
and oven beeps every minute until door is opened
or CLEAWOFF pad is touched.
Conversion Guide
I
If the weight of food is stated in
pounds and ounces, the ounces
must be converted to tenths
(.1) of a pound.
The oven calculates defrosting
time and changes power levels
during defrosting to give even
defrosting results.
Step 4: Touch START pad.
Display shows defrost time
Ounces Pounds
1–2 .1
3
.3
.4
8 .5
.6
9-1o
12-13 .8