Basic Call Features - Yealink SIP-T22P Quick Start Manual

Basic Call Features

Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Call soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the Call soft key.
Using the headset:
1. With the headset connected, enter the number.
2. Press to activate the headset mode, and then press the Call soft key.
Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by pressing
the HEADSET key, the Speakerphone key or by picking up the handset. Headset mode requires a connected headset.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Note: You can ignore an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset:
Hang up the handset or press the Cancel soft key.
Using the speakerphone:
Press or the Cancel soft key.
Using the headset:
Press the Cancel soft key.
Redial
Press to enter the Placed Calls list, press
soft key.
Press twice when the phone is idle to call the last dialed number.
Call Mute and Un-mute
Press to mute the call.
Press again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press the Hold soft key during an active call. The line key LED flashes green.
To resume the call, do one of the following:
If there is only one call on hold, press the Resume soft key.
.
or to select the desired call, and then press or the Call
4