Table of Contents
Advertisement
hardware under all expected conditions of
vibration and temperature or equivalent.
Secure all cabling.
Camera has been evaluated for wall/ceiling
mounting using #8 1¼" long, 12 TPI, wood
screws with Robertson heads secured into a 2x4
stud under ½" drywall
Camera has not been evaluated for safety
requirements using other mounting kits.
The mounting holes are configured for a single-gang
electrical box or a round ceiling electrical box. See
page 27 for the mounting hole diagram. The housing
can also be mounted to any flat surface.
Step 3.1 -
Once the mounting location has
been selected, determine if the
video and the power input wires
should enter the housing through
either the side or the bottom. For
ease of re-assembly, this step
should be performed in conjunction
with Section 2, Input Power
Connections.
10
Advertisement
Table of Contents
