Connecting external devices
Read the documentation for the external device before connecting it.
!
With the exception of USB and FireWire devices, always remove all power plugs before
connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the plug itself when disconnecting a cable. Never pull the cable!
When connecting or disconnecting cables, follow the sequence described
Connecting cables
●
Switch off all the equipment concerned.
●
For all the equipment concerned, remove the power plugs from the power sockets.
●
Connect the cables at the device and peripheral equipment. In every case, always follow the
safety instructions given in the section "Important notes" and in the "Safety / Regulations"
manual.
●
Plug the data communication cables into the data/telephone network sockets.
●
Insert the power plugs into grounded power sockets.
Disconnecting cables
●
Switch off all the equipment concerned.
●
For all the equipment concerned, remove the power plugs from the power sockets.
●
Unplug the data communication connectors from the data/
telephone network sockets.
●
Unplug all cables from the device and peripheral equipment.
USB and FireWire devices are hot-pluggable. This means you can connect and disconnect
i
the cables of USB devices while the operating system is running.
Additional information can be found in the "Connecting external devices to the USB ports"
section and in the documentation for the USB devices.
Fujitsu Technology Solutions
Connecting external devices
below.
31