Bosch MIC612 Installation Manual page 45

MIC612 Thermal Camera
Outputs Setup Submenu
Exit...
1. NONE
2. NONE
3. NONE
4. NONE
5. NONE
6. NONE
7. NONE
8. NONE
9. NONE
10. NONE
11. NONE
12. NONE
Outputs Setup Submenu Choices:
Outputs Setup
Defines physical outputs and keyboard commands for use in a rule.
Outputs 1-4
Defines a physical output: N.O. (Normally Open circuit) (default setting) or N.C. (Normally
closed circuit).
Outputs 5-12
Defines a command output for use in a rule.
Option
None
Aux On
Aux Off Responds to a keyboard OFF command.
Shot
OSD
Transmit Transmits a message back to the head end (available with RS-232 serial and Bilinx
NONE
Rule Setup Submenu
NOTICE!
You can program a total of twelve rules. You must define the inputs and outputs before you
program a rule. See Section 6.7 Alarm Setup, page 43, to configure alarm inputs and outputs.
Bosch Security Systems, Inc.
Outputs Setup...
Focus / Iris: Select Type
Right / Left: Select Mode
Description
(Default setting) No command defined.
Responds to a keyboard ON command.
Responds to a Preset shot.
An on-screen display.
connections).
(Default setting) No command defined.
On-Screen Display (OSD) Menus (Bosch Protocol) | en
Installation Manual
45
F.01U.249.416 | 1.1 | 2012.03