Document Browsing On Mmd; Configuration - Bosch DCN multimedia 1.41 Release Notes

Table of Contents

Advertisement

DCN multimedia Release Notes 1.41
DCN-IDESK
DCN-CCU2
Configure which
languages are on
which output channels
On the DCN-IDESK is configured which languages are on which DCN Next Generation Channels,
please refer to the DCN Next Generation installation manual on how to do this.
On the Omneo Media Interface using the push/rotate button is configured:
On which Omneo input the Floor audio from DCN multimedia is received
o Select the Omneo Input number
o Configure the DCN NG channel for Floor (00 is the Floor channel for DCN NG)
On which Omneo outputs the interpreted languages are being sent to DCN multimedia
o Select the Omneo Output number
o Configure the DCN NG channel (01 – 31) which is forwarded to DCN multimedia
In the DCN multimedia application is configured:
Which languages are received on which Omneo Media Interface Outputs (the order of the
languages is the order of how the languages are displayed on the DCN multimedia device
To which Omneo Media Interface Input the DCN multimedia Floor audio is being sent

4.4 Document browsing on MMD

To browse documents on a MMD, a web server is needed to store the documents.
The server PC running the DCN multimedia server software has a web server, but it is not
installed.
4.4.1

Configuration

Please see
http://technet.microsoft.com/en-us/library/cc731179.aspx
up the web server.
The easiest method is to select all options in the IIS.
To test the IIS, type the following in a webbrowser:
To test the IIS on the MMD:
Go to the homescreen of the MMD
Open the web browser
Type http://«server ip-address»
If the MMD does not show the IIS logo, you should check the firewall on the server PC.
Port 80 needs to be open.
Bosch Security Systems| 2015-02-24
MOST
Omneo Media
DCNM
Interface
Server PC
Configure on each
Activate DCNM-LSSL language
4OMI4 device, using
selection at seat licenses
the push/rotate
Assign Language selection licenses
button, the DCNNG
to seats
channels
Configure the system channels
http://localhost
DCNM-APS
DCNM-MMD
Participant can select
between Floor and
interpretated languages
for information on how to set
it should show:
10

Advertisement

Table of Contents
loading

Table of Contents