commands)
• EX OFF ONLY (excluded from "ALL OFF" but still responds to "ALL
ON" commands).
Ex On/Off
To Turn all devices on or off, perform the following steps:
1. Press ALL once to put the remote in ALL Mode. The remote will
stay in this mode until one of the other modes is selected.
2. Press either ON or OFF. Any ON or OFF button can be pressed.
(The screen will display ALL ON or ALL OFF depending on what
key was pressed).
Adding or Removing Lights to or from All Control:
1. Enter SETUP and select ALL SETUP.
2. Press OK. The screen will display EX ON/OFF (exclude from
both).
3. Use either Arrow key to select the desired option.
4. Press OK. The screen will display the selected option and WAIT-
ING.
5. Press the button on the device that you wish to change.
6. The screen will display SUCCESS.
DATE, TIME and DAY SETUP
The date, time and day must be setup before programming timed
events. Please Note: You will need to reprogram the Time, Date
and Day if the batteries are removed for more than three minutes.
Time
Setting the Time:
1. Enter SETUP and select DATE/TIME.
2. Press OK. The screen will display TIME.
3. Press OK. The screen will display TIME 12hr.
4. Change the time mode (12hr/24hr) with the #4 key.
5. Adjust the hour by pressing the #1 key.
ALL SETUP
Inc On/Off
Date/Time
Date
17
Ex On Only
Ex Off Only
Day