Setting Spot Meter
The brightness of the object during shooting is
displayed.
This function is useful when setting video or stage
lighting or when specifying camera exposure.
A cursor indicating the location and the brightness
(%) of that location are displayed in the images
shown on the LCD monitor and viewfinder screen.
Zebra patterns display the brightness of output
0
video signals.
(A P71 [Setting Zebra Pattern] )
This function allows you to check the brightness
0
of input images from the lens without depending
on image processing such as gamma curve. The
dynamic range of the camera recorder is 400 %
and a brightness range of 0 % to 400 % and
above is displayed.
Memo :
Spot meter may not be consistent with the zebra
0
display range. When [Camera Process] B
[Gamma] is set to "Cinema", the 100IRE output
is not consistent with the 100 % display.
When an object of more than 400 % luminance
is detected, it is displayed as "400 %".
(A P103 [ Gamma ] )
MENU/THUMB
AE LEVEL
CANCEL
.
1 Select one of the following from [Main
Menu] B [Camera Function] B [User Switch
Set] B [Spot Meter].
(A P100 [ Spot Meter ] )
72
MENU/THUMB
CANCEL
Item
Settings
Max & Min
Displays the
brightness (%)
and positions of
the brightest and
darkest areas in
the screen.
Frames may also
be stopped at the
current positions.
Max
Displays the
brightness (%)
and position of the
brightest area in
the screen.
Frames may also
be stopped at the
current positions.
Min
Displays the
brightness (%)
and position of the
darkest area in the
screen. Frame
may also be
stopped at the
current positions.
Manual
Displays the
brightness (%) of
the specified
position.
2 Assign the "Spot Meter" function to any of
the user buttons.
(A P38 [Assignment of Functions to User
Buttons] )
3 Press the user button that is assigned with
"Spot Meter".
The operation switches as below when the
button is pressed.
Color of Frame
Indicating the
Position
Max: Green
0
Min: Yellow
0
Green
Yellow
Green
(Blinks in green
when specifying
the position)