Using With A Network Camera - Panasonic KX-NT700 Operating Instructions Manual

Using with a Network Camera

camera's IP address and port number
automatically by following the procedure
below.
1.
Click [Search].
•
A list of up to 10 network cameras
connected to the LAN is displayed
in the [Choose Network Camera]
dialogue box.
2.
Select the desired network camera and
click [Choose].
•
The selected network camera's IP
address and port number are
displayed in the [IP Address] and
[Port Number (MotionJPEG)]
fields.
4.
If necessary, set [Get Network Camera
information from a Unit when CPM starts].
•
If the checkbox is checked
Network camera settings are automatically
obtained from the unit when CPM is started.
Settings registered on CPM are overwritten by
the settings obtained from the unit.
•
If the checkbox is unchecked
Network camera settings are not obtained from
the unit when CPM is started. Settings
registered on CPM are used for video
conferencing.
5.
Click [OK].
A confirmation dialogue box is displayed to check
whether it is OK to save the stored network settings
on the unit.
Click [Yes] to save the settings to the unit.
Click [No] to not save the settings to the unit.
52 Operating Instructions for Conferencing Phone Manager
Using with a Network
Camera
Before using CPM with a network camera, it is
necessary to connect a network camera (sold
separately) to the same LAN as your computer, and
register the network camera (see Page 51).
Creating a Video Conference
1.
Make a call to the other party using an IP line (see
Page 37).
•
The [Video Conference] screen is displayed.
Note
•
If the Video Conference screen is not
displayed when making a call, or if you
closed the screen once, click
Main screen.
on the right side of the
Document Version 2010/02