3. The confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set
Auto Setup
with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
●
(up and down only)
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button
Manual Tuning
Normally use
Auto Setup
●
If tuning has not been done completely or for adjusting the direction of the
●
aerial, use this function. (DVB)
All DVB channels found will be added to
●
■
DVB-C
1. Enter the frequency with
Normally set
●
2. Select
Start scan
■
DVB-T
1. Select a channel with
channel.
Set where the level of
●
2. Press
OK
to search.
or
Update Channel List
Numeric
buttons.
Symbol Rate
and
Service ID
with
/
and press
/
and adjust frequency with
Signal Quality
- 71 -
OK
to start
Auto
to retune DVB channels.
Channel
List.
to Auto.
OK
to search.
/
becomes the maximum.
Setup.
for each