13-2-1.
UTY-LNHUM/AR-RAH1U
SWITCHING SELECTION OF FUNCTION SETTING MODE
(2) Press and hold the "FAN" and the " SET TEMP.
press the "RESET" button.
SELECTION AND CONFIRMATION OF CUSTOM CODE
(3) Press the " SET TEMP.
TEMP.
" buttons to select the custom
q
code that matches the setting with the
indoor unit.By selecting the appropriate
custom code, the communication between
the indoor unit and the wireless RC
become possible.
CUSTOM CODE
( - - - )
The initial setting is " "
FAN
SET TEMP. ( )
RESET
" or " SET
p
- (01 - 126) -
" buttons. While holding these 2 buttons,
p
Function setting
mode display
(4) Press the "TIMER MODE" button to send
the code to the indoor unit.
Pi Pi