Cisco ASR 5000 Series Installation And Administration Manual page 54

External
Hide thumbs Also See for ASR 5000 Series:
Table of Contents

Advertisement

▀ Installing L-ESS Application in Stand-alone Mode
Parameter
Description
Disk threshold 1
Type the first level threshold value, in percentage, for monitoring disk usage. If
disk utilization goes beyond this threshold an alarm is raised indicating that the
disk is overutilized. The value must be an integer from 1 through 100.
Disk threshold 2
Type the second level threshold value, in percentage, for monitoring disk usage.
If disk utilization goes beyond this threshold an alarm is raised indicating that the
disk utilization has crossed the configured second level threshold. This threshold
is specifically to notify that disk is now critically low. The value must be an
integer from 1 through 100.
Enable SNMP
Type (Y)es to enable the SNMP trap notifications.
SNMP Version
Type the SNMP version of the traps that should be generated by L-ESS. The
currently supported SNMP versions are v1 and v2c.
Add SNMP host
Type (Y)es to add another SNMP Manager host.
Remove SNMP
Type (Y)es to remove the currently configured SNMP Manager host.
host
Log level
This value specifies the severity of log messages. The values can be one of the
following:
SNMP Host Configuration
SNMP host name
Type the hostname or IP address where the SNMP Manager resides.
SNMP port
Type the SNMP Manager port number.
SNMP
Type the community string that should be used while sending the SNMP traps.
community
string
Remote Host Configuration
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
54
Important:
The maximum number of SNMP Manager hosts
that are allowed to be configured is four.
Important:
The default values for all the parameters except
SNMP Manager Host Name will be taken from previous host
configuration for the new host.
0 - Disable all logs
1 - Debug Level logs
2 - Info Level logs
3 - Warning Level logs
4 - Error Level logs
5 - Critical Level logs
L-ESS Installation and Configuration
Default Value
80
98
Yes
v1
No
No
4
Null
162
public
OL-22979-03

Advertisement

Table of Contents
loading

Table of Contents