Table of Contents
Advertisement
High Density Video Cassette Recorder | Instruction Manual | Setting the On-Screen Display
Buzzer Select
Allows you to set up the buzzer option. You can
select:
•
ALARM : When an alarm input is activated, the
buzzer will operate.
•
VIDEO LOSS : When the video signal fails, the
buzzer will operate.
•
ERROR MODE : When the VCR operates
incorrectly, the buzzer will operate.
•
TAPE END : When the VCR reaches the end of
tape, the buzzer will operate when in the record
mode.
•
BUTTON : When selected to ON, the buzzer will
be activated when a key is pressed.
9. Press the MOVE button to select the BUZZER
SELECT option and then press the SELECT
button to enter the menu.
BUZZER SELECT menu will appear.
BUZZER SELECT MODE
[BUZZER SELECT]
ALARM
VIDEO LOSS
ERROR MODE
TAPE END
BUTTON
↓
[
][→]
10. Press the MOVE button to choose the respective
option and then press the SELECT button to select
ON/OFF.
Note:
•
The TAPE END buzzer selection is only activated
when you have selected "RE-REC EVEN IF
ALARM" or "STOP IF ALARM (when there is no
alarm)" in the REPEAT function.
Bosch Security Systems | 26 Feb 2003 | Draft
ON
ON
ON
ON
ON
[MENU]END
6.5 SEARCH SET UP Menu
The SEARCH SET UP function enables you to search
for specified alarm events. The VCR will
automatically search the tape for the alarm index.
To scan alarm recordings during the STOP mode when
the tape is inserted:
1. Press the MENU button and the main menu will
appear.
2. Press the MOVE button to select the SEARCH
SET UP menu, and press the SELECT button to
enter the menu.
SEARCH SET UP MENU
[SEARCH SET UP]
COUNTER RESET
GO TO ZERO
PRESS REW OR FF
TO BEGIN ALARM SCAN
↓
[
][→][<< >>]
3. Rotate and release the SHUTTLE ring to REW or
FF to begin the alarm scan.
The COUNTER indicator on the VCR front panel
will indicate the tape position (if COUNTER has been
selected). This counter indication will also be
displayed in the SEARCH SET UP menu. You can
now reset this count to zero, which enables you to
select this tape position as the starting point when the
"GO TO ZERO" option is selected, or when the tape
is inserted into the VCR, the tape will automatically go
the the "ZERO" position.
4. Press the MOVE button to select COUNTER
RESET, and press the SELECT button to reset the
counter to zero.
6.6
SYSTEM SET UP Menu
The SYSTEM SET UP allows you to personalise your
system by defining access control and system
specification settings.
1. Press the MENU button. The main menu will
appear.
2. Press the MOVE button to select SYSTEM SET
UP and press the SELECT button to enter the
menu.
EN | 20
0047
[MENU]END
Advertisement
Table of Contents
