Unpacking Hdtv Receiver And Accessories/Connection Overview - LG LST-3100A Owner's Manual

Unpacking HDTV Receiver and Accessories/Connection Overview

Make sure you have received all the accessories listed below with the High Definition Television Receiver.
High Definition Television Receiver
The HDTV Receiver is capable of receiving signals from cable and/or over-the-air antenna
sources and sending the signals to your TV.
Included with the Receiver are the following accessories.
Audio Cable
Component(YPbPr) Cable
Remote Control
STB STB TV VCR VCR DVD AUX UX
STB STB
MODE MODE POWER PO WER
TV/INPUT TV/INPUT ez ADD ez ADD *
AUDIO UDIO CC CC SIGNAL SIGNAL
SELECT
MUTE MUTE FLASHBK FLASHBK
PG UP PG UP
PG DN PG DN
RATIO RA TIO FREEZE FREEZE SURF SURF HELP HELP
STATION
PR PROGRAM OGRAM
GUIDE GUIDE
Video Cable
RF Cable
2 AA Batteries
Audio/Video Jacks and Cables
The Audio/Video jacks provide excellent picture and sound quality. They are
used for making most Audio/Video connections between components. The
Audio/Video jacks may be color coded (yellow for video, red for right audio,
and white for left audio). If your component has only one input for audio
(mono), connect it to the left (white L/mono) audio jack on the HDTV
Receiver.
Component Out Jacks and Cables
Component Cables are used to connect the HDTV Receiver to an industry
standard YPbPr compatible HD Monitor (green for Y, blue for Pb, and red
for Pr). Remember to connect the left and right audio cables. The YPbPr
Component jacks carry only the picture signals, not the sound.
ANT LOOP OUT Jack, and RF Cable
ANT LOOP OUT provides an RF connection between the HDTV Receiver
and the TV and provides the signal of ANT IN jack to TV.
Remote Control
In addition to the HDTV Receiver, the remote control can be programmed to
control many other devices.
Batteries
To install the batteries, slide open the battery compartment and insert the
two AA batteries provided.
7