Gas Connection - Miele KM 3054 Operating And Installation Instructions

Gas connection

,
Connection to the gas supply, or
conversion from one type of gas to
another, should only be undertaken
by an an registered gas installer
under the gas safety regulations
(Registration of Gas Installers and
Gas Contractors).
Only use approved stainless steel
braided flexible tubing bearing
EMSD Approval marking for
connection up to gas supply point
Every appliance should have its own
easily accessible isolating valve.
Check with your local gas supplier
about the type of gas and its
calorific value, and compare this
information with the type of gas
quoted on the data plate.
46
The gas installation must be carried
out so that the connection is not
subject to high temperatures when
the appliance is in use.
It is particularly important that the
flexible gas connection pipes and
isolator valves do not come into
contact with hot gas exhaust fumes.
Neither the flexible gas connection
pipe nor the electrical cable must
come into contact with any parts of
the appliance which get hot, as this
could damage the flexible gas
connection pipe or the electrical
cable.
Flexible gas connection pipes and
cables must be installed so that they
do not impede moving kitchen parts
(e.g. drawers), which must be able
to move freely without hindrance.