Usb Playback; Playing Files Stored On Usb Storage Devices; Playing In The Desired Order (Programmed Play) - Pioneer X-SMC1-K Operating Instructions Manual

07

USB playback

Chapter 7:
USB playback
Playing files stored on USB storage
devices
• This unit may not recognize a USB storage device, play
files or supply power to a USB storage device. For
details, see When a USB storage device is connected on
page 35.
• Pioneer does not guarantee that any file recorded on a
USB storage device will play or that power will be
supplied to a USB storage device. Also note that Pioneer
will accept no responsibility whatsoever for loss of files
on USB storage devices caused by connection to this
unit.
1 Press STANDBY/ON to turn the power on.
The selected input is displayed on the front panel display.
Press FUNCTION / to select USB as the
2
input source.
'
' is shown on the front panel display.
3 Connect a USB storage device.
The Disc Navigator appears automatically.
Use /// to select the file, then press
4
ENTER.
Playback starts.
• If you press  PLAY, this unit will automatically play files
stored on a USB storage device.
• When changing to a different input source, stop the USB
memory playback first, before changing.
• Turn the power off before removing the USB storage
device.
Tip
• When a USB storage device is not playing and the unit
has not been operated for 30 minutes or more, the power
will automatically turn off.
22
En
Playing in the desired order
(Programmed Play)
This unit can play repeatedly files stored in the USB storage
device. For details, see Playing in the desired order
(Programmed Play) on page 18.